HD34732 RF Amplifier
Module
HD34732
| FREQUENCY RANGE700–6,000 MHz | OUTPUT POWER25 W minimum / 30 W typical Psat |
| GAIN44 dB minimum | SUPPLY VOLTAGE28 – 30 VDC |
| CONFIGURATIONModule | CATEGORYBroadband Amplifier Module |
HD34732 electrical specifications
Source: HD34732 V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 0.7 – 6.0 GHz | |
| Power Output @ Psat | 25 W minimum / 30 W typical | CW |
| Power Output @ P1 dB | 15 W typical | CW |
| Power Gain | 44 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB minimum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 34 dBm/Tone, A = 1 MHz |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 28 – 30 VDC | |
| Current Consumption | 6 A maximum | At rated Pout |
HD34732 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | SMA female | |
| DC Power / Interface Connector | 9 Pin D-Sub |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 105 × 75 × 30 mm | Excluding connectors |
| RF Connectors In/Out | SMA female | |
| DC Power / Interface Connector | 9 Pin D-Sub | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD34732 documentation
Download HD34732 V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD34732
HD34732 is listed for 700–6,000 MHz operation.
Output: 25 W minimum / 30 W typical Psat. Gain: 44 dB minimum. P1dB: 15 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 28 – 30 VDC. Cooling: External heatsink.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 105 × 75 × 30 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.