HD35096 RF Amplifier
Module
HD35096
| FREQUENCY RANGE1,200–1,400 MHz | SATURATED OUTPUT (PSAT)150 W minimum CW |
| POWER GAIN52 dB minimum | SUPPLY VOLTAGE28–30 VDC nominal |
| CONFIGURATIONModule | CATEGORYLow Frequency Amplifier Module |
HD35096 electrical specifications
From the matching HD35096 V1.2 datasheet. Test conditions: 50 Ω, 25 °C. Minimum, maximum and typical ratings retain the datasheet qualifiers.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating frequency | 1,200–1,400 MHz | — |
| Saturated output (Psat) | 150 W minimum | CW |
| Power gain | 52 dB minimum | 0 dBm or less for rated output |
| Gain flatness | 2.0 dB p-p maximum | Constant input power |
| Input return loss | −10 dB maximum | Relative to 50 Ω |
| Two-tone IMD | −30 dBc typical | 42 dBm/tone; Δ = 1 MHz |
| Harmonics | −20 dBc typical | At rated output |
| Spurious | −60 dBc maximum | Non-harmonic |
| Operating voltage | 28–30 VDC nominal | — |
| Current consumption | 15 A maximum | At rated output |
| Input power protection | +8 dBm maximum | Less than 10 seconds without damage |
| Load VSWR protection | ∞:1 | Less than 1 minute at 100 W; excessive VSWR beyond 1 minute can damage the module. Optional circulator available for quotation. |
| Turn on / off speed | 2 µs maximum | Optional |
HD35096 interface and pin assignments
Pin assignments from the matching HD35096 datasheet. Optional signals are identified separately from standard connections.
| Pin | Function | Description |
|---|---|---|
| 1 | VDD | 28 VDC |
| 2 | GND | Ground |
| 3 | Current sensor | 20 mV / 100 mA typical |
| 4 | Temperature sensor | 10 mV/°C + 500 mV typical |
| 5 | Shutdown | Enable: TTL high or open; disable: TTL low or short |
| 6, 7 | VDD | 28 VDC |
| 8, 9 | GND | Ground |
HD35096 operating and storage conditions
Environmental limits from the matching model datasheet.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating case temperature | −20 to +75 °C | — |
| Storage temperature | −40 to +85 °C | — |
| Relative humidity | Up to 95% | Non-condensing |
| Altitude | 3,000 m | — |
| Shock and vibration | Normal transport | MIL specification available for quotation |
HD35096 mechanical specifications and cooling
Use the model-specific outline drawing in the PDF when planning mounting and connector clearance.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 188 × 91.4 × 27 mm | Excluding connectors |
| Weight | 950 g | — |
| RF input / output | SMA female | N-female RF output option available |
| Power / interface connector | 9-pin D-Sub | — |
| Cooling | External heatsink | Forced air required |
HD35096 documentation
The linked file is HD35096 V1.2.pdf, matched to HD35096. It contains electrical, environmental and mechanical specifications, pin assignments and outline drawings. The third page shows the optional N-type RF output connector. Check the drawings for the selected options; specifications and drawings may vary with options.
About HD35096
The HD35096 datasheet lists 1,200–1,400 MHz.
Saturated output (Psat): 150 W minimum; CW.
28–30 VDC nominal. Current consumption: 15 A maximum; at rated output.
Pin 1: VDD — 28 VDC. Pin 2: GND — Ground. Pin 3: Current sensor — 20 mV / 100 mA typical. Pin 4: Temperature sensor — 10 mV/°C + 500 mV typical. Pin 5: Shutdown — Enable: TTL high or open; disable: TTL low or short. Pin 6, 7: VDD — 28 VDC. Pin 8, 9: GND — Ground.
External heatsink; Forced air required. Operating case temperature: −20 to +75 °C. Storage temperature: −40 to +85 °C.
Input power protection: +8 dBm maximum; less than 10 seconds without damage. Load VSWR protection: ∞:1; less than 1 minute at 100 W; excessive VSWR beyond 1 minute can damage the module. Optional circulator available for quotation.
Open HD35096 V1.2.pdf for the complete ratings, pin assignments or control options, and outline drawings.