HD35107 RF Amplifier
Module
Product photograph pending confirmation.
HD35107
| FREQUENCY RANGE800–2,500 MHz | OUTPUT POWER300 W minimum Psat |
| GAIN55 dB minimum | SUPPLY VOLTAGE30 VDC Nom |
| CONFIGURATIONModule | CATEGORYLow Frequency Module |
HD35107 electrical specifications
Source: HD35107 V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 800 – 2500 MHz | |
| Power Output @ Psat | 300 W minimum | CW |
| Power Output @ P1 dB | 100 W typical | CW |
| Power Gain | 55 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 45 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 30 VDC Nom | |
| Current Consumption | 48 A maximum | At rated Pout |
HD35107 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | n/c | n/c |
| 2 | n/c | n/c |
| 5 | SHUTDOWN | Enable = TTL High or Open; Disable = TTL Low or Short |
| Al, A2 | VDD | 30 VDC |
| A3, A4 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 350 × 250 × 30 mm | Excluding connectors |
| RF Connectors In/Out | SMA female / Type-N Female | Dual module |
| DC Power / Interface Connector | 7-Pin Hybrid D-Sub | 7W2 |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35107 documentation
Download HD35107 V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD35107
HD35107 is listed for 800–2,500 MHz operation.
Output: 300 W minimum Psat. Gain: 55 dB minimum. P1dB: 100 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 30 VDC Nom. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 350 × 250 × 30 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.