HD35119 RF Amplifier
System
HD35119
| FREQUENCY RANGE2–200 MHz | OUTPUT POWER500 P1 (catalog) |
| GAIN57 dB minimum | SUPPLY VOLTAGE100 – 240 VAC, 50 – 60Hz |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35119 electrical specifications
Source: HD35119 (2 – 200MHz, 500W, 57dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 2 – 200 MHz | |
| Power Output @ P1 dB | 500 W minimum | CW |
| Power Gain | 57 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 47 dBm/Tone, A = 1 MHz |
| Harmonics | -15 dBc typical | |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC, 50 – 60Hz | |
| Power Consumption | 2000 W maximum | At rated Pout |
HD35119 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | Front or rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5 to 95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 133 × 560 mm | 3U |
| RF Connectors In/Out | Type-N Female | Front or rear panel |
| AC Power | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35119 documentation
Download HD35119 (2 – 200MHz, 500W, 57dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35119
HD35119 is listed for 2–200 MHz operation.
Output: 500 P1 (catalog). Gain: 57 dB minimum. P1dB: 500 W minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC, 50 – 60Hz. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 133 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.