HD35126 RF Amplifier
System
HD35126
| FREQUENCY RANGE1,000–2,500 MHz | OUTPUT POWER300 W minimum Psat |
| GAIN55 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35126 electrical specifications
Source: HD35126 (1 – 2.5GHz, 300W, 55dB) V0.4.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1.0 – 2.5 GHz | |
| Power Output @ Psat | 300 W minimum | CW or Pulse |
| Power Output @ P1 dB | 150 W typical | |
| Power Gain | 55 dB minimum | 0 dBm or less for rated power |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | >20 dB typical | Local or remote capable |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 45 dBm/Tone, A = 1 MHz |
| Harmonics | <-20 dBc typical | At rated output |
| Spurious | -60 dBc maximum | Non-harmonic |
| Operating Voltage | 100 – 240 VAC | 47 – 63Hz |
| Power Consumption | 2500 W maximum | At rated output |
HD35126 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 177 × 700 mm | 4U, excluding handles |
| RF Conn. In / Out / Sample | N-Female | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35126 documentation
Download HD35126 (1 – 2.5GHz, 300W, 55dB) V0.4.pdf for the complete specifications, test conditions, drawings and available options.
About HD35126
HD35126 is listed for 1,000–2,500 MHz operation.
Output: 300 W minimum Psat. Gain: 55 dB minimum. P1dB: 150 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 177 × 700 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.