HD35144 RF Amplifier
System
HD35144
| FREQUENCY RANGE500–2,000 MHz | OUTPUT POWER200 W minimum Psat |
| GAIN53 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35144 electrical specifications
Source: HD35144 (0.5 – 2GHz, 200W, 53dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 500 – 2000 MHz | |
| Power Output @ Psat | 200 W minimum | CW |
| Power Gain | 53 dB minimum | Pin = 0 dBm for rated Pout |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input / Output Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 40 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | |
| Power Consumption | 1500 W maximum | At rated output |
| Pulse to Pulse Jitter / Pulse Width Jitter / Delay | +5ns/+5ns/500ns | |
| Pulse On / Off Ratio | 80 dB minimum |
HD35144 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 133 × 560 mm | 3U, excluding handles |
| RF Connectors In/Out | Type-N Female | |
| Pulse Blanking / Safety Interlock | BNC Female | |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35144 documentation
Download HD35144 (0.5 – 2GHz, 200W, 53dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35144
HD35144 is listed for 500–2,000 MHz operation.
Output: 200 W minimum Psat. Gain: 53 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 133 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.