ULTRA HIGH FREQUENCY AMPLIFIER SYSTEM

HD35151 RF Amplifier
System

6,000–18,000 MHz · 2000 W minimum Psat output · 63 dB minimum gain

Product photograph pending confirmation.

SYSTEM

HD35151

HD35151 is an RF amplifier system covering 6,000–18,000 MHz, listed in the Ultra High Frequency amplifier System product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE6,000–18,000 MHzOUTPUT POWER2000 W minimum Psat
GAIN63 dB minimumSUPPLY VOLTAGE120/208 3 phase V (catalog)
CONFIGURATIONSystemCATEGORYUltra High Frequency amplifier System
P1dB: 800 W typical. Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD35151 electrical specifications

Source: HD35151 (6 – 18GHz, 2000W, 63dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating Frequency Range6.0 – 18.0 GHz
Output Power @ Psat2000 W minimumCW or Pulse
Power Output @ P1 dB800 W typical
Power Gain63 dB minimum0 dBm in or less for rated Pout
Power Gain Flatness5.0 dB p-p maximumConstant input power
Gain Adjustment Range20 dB minimum
Input & Output impedance/Return Loss-10 dB maximum
2-Tone Intermodulation (IMD)-30 dBc typical53 dBm/Tone, A = 1 MHz
Harmonics-20 dBc maximumAt rated Pout
Spurious-60 dBc maximumNon-harmonics
Power Consumption16 kW Per-input (32 kW maximum total)At rated output
CONTROL & MONITORING

HD35151 control and monitoring

ParameterSpecificationConditions / notes
RF Connectors In / Out Forward & Reflected Sample PortsType N-F / WRD650 Type N-FRF Input/Samples Front Panel Std. RF Output Rear Panel Std.

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Storage Temperature-40 to +85 °C
Relative Humidityup to 95%Non Condensing
Altitude3000 meters
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions W x H x D2 × 36U Rack Cabinet
RF Safety InterlockRear PanelContact open Interlock enable
RF Connectors In / Out Forward & Reflected Sample PortsType N-F / WRD650 Type N-FRF Input/Samples Front Panel Std. RF Output Rear Panel Std.
CoolingBuilt-in forced-air coolingAir entry in front /out rear panel

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD35151 documentation

Download HD35151 (6 – 18GHz, 2000W, 63dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD35151

HD35151 is listed for 6,000–18,000 MHz operation.

Output: 2000 W minimum Psat. Gain: 63 dB minimum. P1dB: 800 W typical. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 120/208 3 phase V (catalog). Cooling: Built-in forced-air cooling.

Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.

Dimensions: 2 × 36U Rack Cabinet. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD35151

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy