HD35170 RF Amplifier
System
HD35170
| FREQUENCY RANGE2,000–4,000 MHz | OUTPUT POWER500 W minimum Psat |
| GAIN57 dB minimum | SUPPLY VOLTAGE120/208, 3-Ph, 47-63 Hz |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35170 electrical specifications
Source: HD35170 (2 – 4GHz, 500W, 57dB) V0.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 2.0 – 4.0 GHz | |
| Power Output @ Psat | 500 W minimum | CW or Pulse |
| Power Output @ P1 dB | 100 W typical | |
| Power Gain | 57 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 47 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 120/208, 3-Ph, 47-63 Hz | Opt: 230/400 VAC, 3-Ph |
| Power Consumption | 5 kW maximum |
HD35170 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out/Sample | Type-N Female | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 308 × 750 mm | 7U, excluding connectors |
| RF Connectors In/Out/Sample | Type-N Female | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in forced-air cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35170 documentation
Download HD35170 (2 – 4GHz, 500W, 57dB) V0.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD35170
HD35170 is listed for 2,000–4,000 MHz operation.
Output: 500 W minimum Psat. Gain: 57 dB minimum. P1dB: 100 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 120/208, 3-Ph, 47-63 Hz. Cooling: Built-in forced-air cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 308 × 750 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.