HD35175 RF Amplifier
System
HD35175
| FREQUENCY RANGE400–18,000 MHz | OUTPUT POWER10 W (catalog) |
| GAIN40 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYUltra High Frequency amplifier System |
HD35175 electrical specifications
Source: HD35175 (0.4 – 18GHz, 10W, 40dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Band | Band A | Band B | |
| Power Output CW Band A / BandB | 10 W minimum | CW or Pulse |
| Power Gain | 40 dB minimum | 0 dBm or less for Rated Power |
| Power Gain Flatness | 5.0 dB p-p typical | Constant input power |
| Gain Adjustment Range | >20 dB typical | Local or remote capable |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) Band A / Band B | -30 dBc typical | 30 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 200 W maximum | At rated Pout |
HD35175 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors Input/Output/Sample | N-Female | Front or rear panel |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent / Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Relative Humidity | up to 95% | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D (No display with DMC) | 430 × 88 × 562 mm | 2U, excluding handles |
| Dimensions W x H x D (with Option DMC) | 430 × 133.3 × 560 mm | 3U, excluding handles |
| RF Connectors Input/Output/Sample | N-Female | Front or rear panel |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent / Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35175 documentation
Download HD35175 (0.4 – 18GHz, 10W, 40dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35175
HD35175 is listed for 400–18,000 MHz operation.
Output: 10 W (catalog). Gain: 40 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 88 × 562 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.