LOW FREQUENCY AMPLIFIER SYSTEM

HD35182 RF Amplifier
System

80–1,000 MHz · 1300 W minimum Psat output · 61 dB minimum gain
HD35182 RF amplifier system product photo
SYSTEM

HD35182

HD35182 is an RF amplifier system covering 80–1,000 MHz, listed in the Low Frequency Amplifier System product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE80–1,000 MHzOUTPUT POWER1300 W minimum Psat
GAIN61 dB minimumSUPPLY VOLTAGE120/208, 3-Ph, 47 – 63 Hz
CONFIGURATIONSystemCATEGORYLow Frequency Amplifier System
P1dB: 700 W minimum. Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD35182 electrical specifications

Source: HD35182 (80 – 1000MHz, 1300W, 61dB) V1.7.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating Frequency Range80 – 1000 MHz
Power Output @ Psat1300 W minimum1500 W typical CW
Power Output @ P1 dB700 W minimum1000 W typical CW
Power Gain61 dB minimum0 dBm or less for rated Pout
Power Gain Flatness4.0 dB p-p maximumConstant input power
Gain Adjustment Range20 dB minimumLocal or remote
Input Return Loss-10 dB maximum
Harmonics-20 dBc typicalAt rated output
Spurious-60 dBc maximumNon-harmonics
Operating Voltage120/208, 3-Ph, 47 – 63 HzOpt: 230/400 VAC, 3-Ph
Power Consumption10 kW Mx / 8 kW typicalAt rated output
Sample Port Coupling-60 dBN-Female
CONTROL & MONITORING

HD35182 control and monitoring

ParameterSpecificationConditions / notes
RF Connectors In/Out/SampleType-N Female / 7/16 DIN / N FemaleFront or rear panel
AC Power / InterfaceMs / 9-Pin D-SubOr equivalent

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Operating Ambient Temperature0 to +50 °C
Storage Temperature-40 to +85 °C
Relative Humidityup to 95%Non Condensing
Altitude3000 meters
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions W x H x DAlternate height TBQ13U standard cabinet height
RF Connectors In/Out/SampleType-N Female / 7/16 DIN / N FemaleFront or rear panel
AC Power / InterfaceMs / 9-Pin D-SubOr equivalent
Cooling: Built in Quiet-CoolClosed-circuit air-liquid cooling

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD35182 documentation

Download HD35182 (80 – 1000MHz, 1300W, 61dB) V1.7.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD35182

HD35182 is listed for 80–1,000 MHz operation.

Output: 1300 W minimum Psat. Gain: 61 dB minimum. P1dB: 700 W minimum. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 120/208, 3-Ph, 47 – 63 Hz. Cooling: Closed-circuit air-liquid cooling.

Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.

Dimensions: Alternate height TBQ. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD35182

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy