HD35188 RF Amplifier
System
HD35188
| FREQUENCY RANGE400–1,000 MHz | OUTPUT POWER4,000 W (catalog) |
| GAIN66 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35188 electrical specifications
Source: HD35188 (400 – 1000MHz, 4000W, 66dB) V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 400 – 1000 MHz | |
| Power Output @ Peak Pulse | 4.0 kW minimum | Peak Pulse |
| Power Gain | 66 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 2.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or Remote |
| Input Return Loss | -10 dB maximum | |
| Output Power On/Off Ratio | 80 dB maximum | TTL Gate Control |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 50-60 Hz |
| Power Consumption | 1.5 kW maximum | At rated Pout |
HD35188 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| AC Power / Interface Connector | IEC60320-14 / D-Sub 9-Pins | Or equivalent, Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95% | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 442 × 600 mm | 10U – Excluding handles |
| Gate Control | BNC Female | Front panel |
| AC Power / Interface Connector | IEC60320-14 / D-Sub 9-Pins | Or equivalent, Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35188 documentation
Download HD35188 (400 – 1000MHz, 4000W, 66dB) V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD35188
HD35188 is listed for 400–1,000 MHz operation.
Output: 4,000 W (catalog). Gain: 66 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 442 × 600 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.