HD35199 RF Amplifier
System
HD35199
| FREQUENCY RANGE20–300 MHz | OUTPUT POWER250 W minimum / 300 W typical Psat |
| GAIN54 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35199 electrical specifications
Source: HD35199 (20 – 300MHz, 250W, 54dB) V0.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 20 – 300 MHz | |
| Power Output @ Psat or Peak Pulse | 250 W minimum / 300 W typical | CW or Pulse |
| Power Gain | 54 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 44 dBm/Tone, A = 1 MHz |
| Harmonics | <-15 dBc typical (reduce as freq. increases) | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Output Power @ Off / Delay | -140 dBm/Hz maximum / 250 nS typical | TTL Gate Control |
| Operating Voltage | 100 – 240 VAC | |
| Power Consumption | 1500 W maximum | At rated Pout |
HD35199 control and monitoring
Use the matching datasheet to confirm available control and monitoring interfaces for the ordered configuration.
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
Confirm enclosure dimensions, RF connectors, mounting and cooling requirements in the matching datasheet.
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35199 documentation
Download HD35199 (20 – 300MHz, 250W, 54dB) V0.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD35199
HD35199 is listed for 20–300 MHz operation.
Output: 250 W minimum / 300 W typical Psat. Gain: 54 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Confirm cooling and installation requirements in the datasheet.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.