HD35204 RF Amplifier
System
HD35204
| FREQUENCY RANGE500–18,000 MHz | OUTPUT POWER60 W minimum | 60 W minimum Psat |
| GAIN48 dB minimum | 48 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYUltra High Frequency amplifier System |
HD35204 electrical specifications
Source: HD35204 (0.5 – 1.8GHz, 60W, 48dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range by Band | 0.5 – 6.0 GHz | 6.0 – 18.0 GHz | CW or Pulse |
| Power Output @ Psat | 60 W minimum | 60 W minimum | |
| Power Output @ P1 dB | 50 W minimum | 50 W minimum | |
| Power Gain | 48 dB minimum | 48 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 6.0 dB p-p maximum | 6.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 38 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 1000 W maximum | At rated output |
HD35204 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x Hx D | 483 × 221 × 560 mm | 5U, excluding handles |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | IEC 60320-C14 | Or equivalent |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35204 documentation
Download HD35204 (0.5 – 1.8GHz, 60W, 48dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35204
HD35204 is listed for 500–18,000 MHz operation.
Output: 60 W minimum | 60 W minimum Psat. Gain: 48 dB minimum | 48 dB minimum. P1dB: 50 W minimum | 50 W minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 483 × 221 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.