HD35208 RF Amplifier
Module
HD35208
| FREQUENCY RANGE12,000–18,000 MHz | OUTPUT POWER10 W minimum Psat |
| GAIN43 dB minimum | SUPPLY VOLTAGE30 – 32 VDC |
| CONFIGURATIONModule | CATEGORYUltra High Frequency amplifier Module |
HD35208 electrical specifications
Source: HD35208 V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 12.0 – 18.0 GHz | |
| Power Output Psat | 10 W minimum | CW |
| Small Signal Gain | 43 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | |
| Input Return Loss | 10 dB minimum | |
| Harmonics | >25 dBc | At rated Pout |
| Non Harmonics Spurious | >60 dBc | |
| Noise Figure | 8.0 dB maximum | |
| Operating Voltage | 30 – 32 VDC | |
| maximum Input Power | +8 dBm maximum | Without damage |
HD35208 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | N/A | N/A |
| 2 | N/A | N/A |
| 5 | SHUTDOWN | TTL |
| Al | VDD | 32 VDC |
| A2 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +65 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5to95% | Non Condensation |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 130 × 120 × 27 mm | Excluding connectors |
| RF Connectors In/Out | SMA female | Cover Flange |
| DC Power / Interface Connector | 7-Pin Hybrid D-Sub | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35208 documentation
Download HD35208 V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD35208
HD35208 is listed for 12,000–18,000 MHz operation.
Output: 10 W minimum Psat. Gain: 43 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 30 – 32 VDC. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 130 × 120 × 27 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.