HD35217 RF Amplifier
System
HD35217
| FREQUENCY RANGE3,100–3,500 MHz | OUTPUT POWER1,300 W (catalog) |
| GAIN38 dB (catalog) | SUPPLY VOLTAGE180–260 V (catalog) |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35217 electrical specifications
Source: HD35217(3.1 – 3.5GHz, 1300W, 38dB) V2.6.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 3.1- 3.5 GHz | |
| Output Power @ Peak Pulse | 1300 W minimum | 1000 W minimum | |
| Input Power | 24 dBm +1.0 dB | |
| Saturated Gain | 38 dB minimum | |
| Pulse Width | 2 – 64 pSec | |
| Duty Cycle | up to5% | |
| Rise / Fall Time | <250 nSec / <150 nSec | |
| Droop | <0.8 dB maximum | |
| Harmonics | -30 dBc maximum | At rated Output Power |
| Spurious | -60 dBc maximum | Non-harmonics |
HD35217 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | Front or Rear panel |
| Interface Connector | 9-Pin D-Sub | Front Panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +70°C | |
| Relative Humidity | 95% @ 40°C | Non Condensing |
| Altitude | 3000 m |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 131 × 560 mm | 3U – excluding handles |
| RF Connectors In/Out | Type-N Female | Front or Rear panel |
| RF Output Monitoring | SMA Female | Coupled Port |
| Gate Control Input | BNC Female | Front panel standard |
| Detected RF Output | BNC Female | Front panel standard |
| AC Power | IEC 60320-C14 | Or equivalent |
| Interface Connector | 9-Pin D-Sub | Front Panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35217 documentation
Download HD35217(3.1 – 3.5GHz, 1300W, 38dB) V2.6.pdf for the complete specifications, test conditions, drawings and available options.
About HD35217
HD35217 is listed for 3,100–3,500 MHz operation.
Output: 1,300 W (catalog). Gain: 38 dB (catalog). Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180–260 V (catalog). Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 131 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.