LOW FREQUENCY AMPLIFIER SYSTEM

HD35218 RF Amplifier
System

2,700–2,900 MHz · 8,000 W (catalog) output · 69 dB (catalog) gain
HD35218 RF amplifier system product photo
SYSTEM

HD35218

HD35218 is an RF amplifier system covering 2,700–2,900 MHz, listed in the Low Frequency Amplifier System product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE2,700–2,900 MHzOUTPUT POWER8,000 W (catalog)
GAIN69 dB (catalog)SUPPLY VOLTAGE200–240 V (catalog)
CONFIGURATIONSystemCATEGORYLow Frequency Amplifier System
Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD35218 electrical specifications

Source: HD35218 (2.7 – 2.9GHz, 8000W) V0.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating Frequency Range2.7 – 2.9 GHz
Peak Output Power8 KWatt minimum
Rise / Fall Time<50 ns typical / 60 nS maximum10% to 90%
Harmonics-20 dBc maximum
Spurious-50 dBc maximum
Power flatnessS1.0 dBOver operating frequency
Pulse Width Variation (Jitter)<-70 ns
CONTROL & MONITORING

HD35218 control and monitoring

ParameterSpecificationConditions / notes
RF Connectors In/OutType N-F / Waveguide WR284Front/Rear Panel Standard
Interface ConnectorTBD

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Operating Ambient Temperature-20 to +55°C
Storage Temperature-40 to +70°C
Relative Humidity95% @ 40°CNon-condensing
EMI/EMCMIL STD 461E
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions W x H x D13U standard rack heightAlternate height TBQ
RF Connectors In/OutType N-F / Waveguide WR284Front/Rear Panel Standard
RF Output Monitoring FWD / REVType N-F
AC Power380/220 VAC, 48-64Hz, 3 Phase & Natural4 Wires
Interface ConnectorTBD
CoolingBuilt-in forced-air cooling

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD35218 documentation

Download HD35218 (2.7 – 2.9GHz, 8000W) V0.3.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD35218

HD35218 is listed for 2,700–2,900 MHz operation.

Output: 8,000 W (catalog). Gain: 69 dB (catalog). Preserve the rating definitions and conditions in the complete datasheet.

Supply: 200–240 V (catalog). Cooling: Built-in forced-air cooling.

Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.

Dimensions: 13U standard rack height. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD35218

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy