HD35232 RF Amplifier
System
HD35232
| FREQUENCY RANGE18,000–26,500 MHz | OUTPUT POWER200 W minimum Psat |
| GAIN53 dB minimum | SUPPLY VOLTAGE120/208 VAC, 3-Ph, 47 – 63 Hz |
| CONFIGURATIONSystem | CATEGORYMillimeter Amplifier System |
HD35232 electrical specifications
Source: HD35232 (18 – 26.5GHz, 200W, 53dB) V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 18.0 – 26.5 GHz | |
| Power Output @ Psat | 200 W minimum | CW or Pulse |
| Power Output @ P1 dB | 40 W typical | |
| Power Gain | 53 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4.0 dB p-p typical | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 43 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 120/208 VAC, 3-Ph, 47 – 63 Hz | Opt: 230/400 VAC, 3-Ph |
| Power Consumption | 5000 W maximum | At rated Pout |
HD35232 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 397 × 950 mm | 9U, excluding connectors |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | IEC 60320-C14 | Or equivalent |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35232 documentation
Download HD35232 (18 – 26.5GHz, 200W, 53dB) V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35232
HD35232 is listed for 18,000–26,500 MHz operation.
Output: 200 W minimum Psat. Gain: 53 dB minimum. P1dB: 40 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 120/208 VAC, 3-Ph, 47 – 63 Hz. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 397 × 950 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.