HD35234 RF Amplifier
System
HD35234
| FREQUENCY RANGE18,000–26,500 MHz | OUTPUT POWER20 W minimum Psat |
| GAIN43 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYMillimeter Amplifier System |
HD35234 electrical specifications
Source: HD35234 (18 – 26.5GHz, 20W, 43dB) V1.0.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 18.0 – 26.5 GHz | |
| Power Output @ Psat | 20 W minimum | CW or Pulse |
| Power Output @ P1 dB | 15 W typical | |
| Power Gain | 43 dB minimum | 0 dBm or less for Rated Power |
| Power Gain Flatness | 4.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB typical | Local or remote capable |
| Input / Output Return Loss (50-ohms) | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 33 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc maximum | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 800 W maximum | At rated Pout |
HD35234 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In / Out / Sample Port | 2.92 mm-F / WR42 / 2.92mm-F | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 133 × 750 mm | 3U, excluding handles |
| RF Connectors In / Out / Sample Port | 2.92 mm-F / WR42 / 2.92mm-F | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | IEC 60320-C14 | Or equivalent |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35234 documentation
Download HD35234 (18 – 26.5GHz, 20W, 43dB) V1.0.pdf for the complete specifications, test conditions, drawings and available options.
About HD35234
HD35234 is listed for 18,000–26,500 MHz operation.
Output: 20 W minimum Psat. Gain: 43 dB minimum. P1dB: 15 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 133 × 750 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.