HD35243 RF Amplifier
System
HD35243
| FREQUENCY RANGE18,000–40,000 MHz | OUTPUT POWER27 dBm minimum Psat |
| GAIN30 dB minimum / 40 dB maximum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYMillimeter Amplifier System |
HD35243 electrical specifications
Source: HD35243 (18 – 40GHz, 27W, 30dB) V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 18 – 40 GHz | |
| Power Output @ Psat (CW) | 27 dBm minimum | <0 dBm for rated Pout |
| Linear Gain | 30 dB minimum / 40 dB maximum | 0 dBm or less for rated Pout |
| Power Gain Flatness | +3.0 dB typical / +4.0 dB maximum | Constant input power |
| Input Return Loss | -10 dB typical | |
| Noise Figure | 8 dB maximum / 6 dB typical | |
| Harmonics | -20 dBc maximum | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 50 W maximum | At rated Pout |
HD35243 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | 2.9 mm (kK / air type) Female | Front panel standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +70 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | 2.9 mm (kK / air type) Female | Front panel standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35243 documentation
Download HD35243 (18 – 40GHz, 27W, 30dB) V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD35243
HD35243 is listed for 18,000–40,000 MHz operation.
Output: 27 dBm minimum Psat. Gain: 30 dB minimum / 40 dB maximum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.