HD35263 RF Amplifier
System
HD35263
| FREQUENCY RANGE1,750–1,850 MHz | OUTPUT POWER10 W minimum / 20 W typical Psat |
| GAIN40 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35263 electrical specifications
Source: HD35263 (1.75 – 1.85GHz, 10W, 40dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
Frequency clarification: This page follows the matching PDF (1,750–1,850 MHz). The product matrix lists 1,800–1,800 MHz. Confirm the required frequency range when requesting a quote.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating frequency range | 1800 ±50 MHz | |
| Power Output @ Psat | 10 W minimum / 20 W typical | CW |
| Power Output @ P1 dB | 8 W minimum | |
| Power Gain | 40 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 30 dBm/Tone, A = 1 MHz |
| Harmonics | <-25 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | |
| Power Consumption | 100 W maximum | At rated output |
HD35263 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Relative Humidity | up to 95% | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D (No display with DMC) | 430 × 88 × 560 mm | 2u, excluding handles |
| RF Conn. In / Out / Sample | N-Female | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35263 documentation
Download HD35263 (1.75 – 1.85GHz, 10W, 40dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35263
HD35263 is listed for 1,750–1,850 MHz operation.
Output: 10 W minimum / 20 W typical Psat. Gain: 40 dB minimum. P1dB: 8 W minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 88 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.