ULTRA HIGH FREQUENCY AMPLIFIER SYSTEM

HD35265 RF Amplifier
System

9,685–9,715 MHz · 5 kW minimum Psat output · 67 dB minimum gain

Product photograph pending confirmation.

SYSTEM

HD35265

HD35265 is an RF amplifier system covering 9,685–9,715 MHz, listed in the Ultra High Frequency amplifier System product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE9,685–9,715 MHzOUTPUT POWER5 kW minimum Psat
GAIN67 dB minimumSUPPLY VOLTAGE120–208 V (catalog)
CONFIGURATIONSystemCATEGORYUltra High Frequency amplifier System
Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD35265 electrical specifications

Source: HD35265 (9.55 – 9.85GHz, 5000W, 67dB) V0.8.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Rated Output Power @ Psat5 kW minimum
Power Gain67 dB minimum0 dBm or less for rated Pout
Power Gain Flatness2.0 dB p-pConstant input power
Gain Adjustment Range25 dB minimum
Input & Output impedance/ Return Loss-10 dB maximum
2-Tone Intermodulation (IMD)-30 dBc typical57 dBm/Tone, A = 1 MHz
Harmonics-40 dBc maximumAt rated Pout
Spurious-60 dBc maximumNon-harmonics
Power Consumption25 kW Per-input (50 kW maximum total)<35 kW typical @ rated Pout
CONTROL & MONITORING

HD35265 control and monitoring

Use the matching datasheet to confirm available control and monitoring interfaces for the ordered configuration.

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Operating Ambient Temperature0 to +50 °C
Relative Humidityup to 95 %Non-condensing
Altitude3000 meters
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions W x Hx D2 × 45U Rack Cabinet
RF Safety InterlockRear PanelContact open Interlock enable
CoolingBuilt-in forced-air coolingAir entry in front /out rear panel

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD35265 documentation

Download HD35265 (9.55 – 9.85GHz, 5000W, 67dB) V0.8.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD35265

HD35265 is listed for 9,685–9,715 MHz operation.

Output: 5 kW minimum Psat. Gain: 67 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 120–208 V (catalog). Cooling: Built-in forced-air cooling.

Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.

Dimensions: 2 × 45U Rack Cabinet. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD35265

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy