HD35273 RF Amplifier
Module
HD35273
| FREQUENCY RANGE2,000–18,000 MHz | OUTPUT POWER24 dBm minimum Psat |
| GAIN60 dB minimum | SUPPLY VOLTAGE13–18 V (catalog) |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier Module |
HD35273 electrical specifications
Source: HD35273 V1.0.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 2.0 – 18.0 GHz | |
| Power Output @ Psat | 24 dBm minimum | CW |
| Power Output @ P1 dB | 24 dBm Nom | CW |
| Linear Gain | 60 dB minimum | |
| Noise Figure | 7.5 dB maximum | 4 dB typical |
| Harmonics | -20 dBc typical | |
| Supply Voltage | 12 VDC Nom | |
| Current Consumption | 800 mA typical |
HD35273 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Connectors (RF Ports) | SMA-F |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +60 °C | |
| Storage Temperature | -40 to +70 °C | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 53.25 × 17 × 5.17 mm | Excluding connectors |
| Connectors (RF Ports) | SMA-F |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35273 documentation
Download HD35273 V1.0.pdf for the complete specifications, test conditions, drawings and available options.
About HD35273
HD35273 is listed for 2,000–18,000 MHz operation.
Output: 24 dBm minimum Psat. Gain: 60 dB minimum. P1dB: 24 dBm Nom. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 13–18 V (catalog). Confirm cooling and installation requirements in the datasheet.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 53.25 × 17 × 5.17 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.