HD35275 RF Amplifier
Module
HD35275
| FREQUENCY RANGE2,000–18,000 MHz | OUTPUT POWER20 dBm (catalog) |
| GAIN20 dB minimum | SUPPLY VOLTAGE15 V (catalog) |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier Module |
HD35275 electrical specifications
Source: HD35275 V1.0.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 2.0 – 18.0 GHz | CW |
| Power Output @ P1 dB | 20 dBm minimum | 22 dBm typical |
| Power Gain | 20 dB minimum | 27 dB typical |
| Gain Flatness | 2.0 +/- dB p-p maximum | |
| Input Return Loss | -10 dB maximum | |
| Noise Figure | 4.0 dB maximum | |
| Harmonics | -20 dBc typical | At rated Pout |
| Current Consumption | 0.350 A maximum |
HD35275 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 2 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -65 to +125 °C | |
| Relative Humidity | up to 95% | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 18.1 × 16.3 × 7.7 mm | Excluding connectors |
| RF Connectors In/Out | SMA female | |
| DC Power / Interface Connector | Feed-Thru | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35275 documentation
Download HD35275 V1.0.pdf for the complete specifications, test conditions, drawings and available options.
About HD35275
HD35275 is listed for 2,000–18,000 MHz operation.
Output: 20 dBm (catalog). Gain: 20 dB minimum. P1dB: 20 dBm minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 15 V (catalog). Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 18.1 × 16.3 × 7.7 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.