HD35277 RF Amplifier
Module
HD35277
| FREQUENCY RANGE7,500–18,000 MHz | OUTPUT POWER27 W (catalog) |
| GAIN37 dB minimum | SUPPLY VOLTAGE15 V (catalog) |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier Module |
HD35277 electrical specifications
Source: HD35277 V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 7.5 – 18.0 GHz | |
| Power Output @ P1 dB | 27 dBm minimum | |
| Linear Gain | 37 dB minimum | -9 dBm for +27 dBm output |
| Small Signal Gain Flatness | +2 dB maximum | |
| Noise Figure | 6 dB maximum / 3 dB typical | 4 dB typical |
| 2-Tone Intermodulation (IMD) | -32 dBc typical | 17 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | |
| Spurious | -60 dBc maximum | Non-harmonics |
| Input Return Loss | 10 dB minimum | |
| Supply Voltage | 15 VDC Nom | |
| Current Consumption | 800 mA maximum |
HD35277 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Connectors (RF Ports) | SMA-F |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -40 to +85 °C | |
| Storage Temperature | -55 to +125 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 53.34 × 25.4 × 9.65 mm | |
| Connectors (RF Ports) | SMA-F |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35277 documentation
Download HD35277 V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD35277
HD35277 is listed for 7,500–18,000 MHz operation.
Output: 27 W (catalog). Gain: 37 dB minimum. P1dB: 27 dBm minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 15 V (catalog). Confirm cooling and installation requirements in the datasheet.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 53.34 × 25.4 × 9.65 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.