HD35280 RF Amplifier
Module
HD35280
| FREQUENCY RANGE18,000–40,000 MHz | OUTPUT POWER10 W (catalog) |
| GAIN20 dB typical | SUPPLY VOLTAGE15 V (catalog) |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier Module |
HD35280 electrical specifications
Source: HD35280 V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 18 – 40 GHz | |
| Power Output @ P1 dB | 10 dBm minimum | CW |
| Linear Gain | 20 dB typical | |
| Input / Output VSWR | 2:1 typical / 2.5:1Max | |
| Noise Figure | 5 dB maximum | |
| DC Bias Voltage | +15 VDC typical | |
| DC Current | 240 mA typical |
HD35280 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | 2.92 mm / K-Female | |
| DC Power / Interface Connector | DC connection terminals |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -40 to +85 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 14.95 × 18.8 × 8.9 mm | Excluding connectors |
| RF Connectors In/Out | 2.92 mm / K-Female | |
| DC Power / Interface Connector | DC connection terminals | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35280 documentation
Download HD35280 V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35280
HD35280 is listed for 18,000–40,000 MHz operation.
Output: 10 W (catalog). Gain: 20 dB typical. P1dB: 10 dBm minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 15 V (catalog). Cooling: External heatsink.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 14.95 × 18.8 × 8.9 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.