HD35282 RF Amplifier
Module
HD35282
| FREQUENCY RANGE1,000–18,000 MHz | OUTPUT POWER8 dBm (catalog) |
| GAIN35 dB typical | SUPPLY VOLTAGE12 V (catalog) |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier Module |
HD35282 electrical specifications
Source: HD35282 V0.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1.0 – 18.0 GHz | |
| Power Output @ P1 dB | 8 dBm minimum | |
| Power Gain | 35 dB typical | |
| Gain Flatness | 3 dB p-p maximum | |
| Harmonics | -20 dBc typical | At rated Pout |
| Noise Figure | 2.5 dB typical | |
| DC Bias Voltage | 12 to 15 VDC | |
| DC Current | 110 mA typical |
HD35282 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Connectors (RF Ports) | SMA Female |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +60 °C | |
| Storage Temperature | -40 to +85 °C |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 30.5 × 21.6 × 11.5 mm | |
| Connectors (RF Ports) | SMA Female |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35282 documentation
Download HD35282 V0.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD35282
HD35282 is listed for 1,000–18,000 MHz operation.
Output: 8 dBm (catalog). Gain: 35 dB typical. P1dB: 8 dBm minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 12 V (catalog). Confirm cooling and installation requirements in the datasheet.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 30.5 × 21.6 × 11.5 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.