HD35283 RF Amplifier
Module
HD35283
| FREQUENCY RANGE0.009–1,000 MHz | OUTPUT POWER2 W minimum Psat |
| GAIN33 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier System |
HD35283 electrical specifications
Source: HD35283 V0.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
Frequency clarification: This page follows the matching PDF (0.009–1,000 MHz). The product matrix lists 0.01–1,000 MHz. Confirm the required frequency range when requesting a quote.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 9 KHz – 1.0 GHz | |
| Power Output @ Psat | 2 W minimum | CW or Pulse |
| Power Output @ P1 dB | >1 W typical | |
| Linear Gain | 33 dB minimum | 0 dBm or less for rated Pout |
| Input Return Loss | -10 dB maximum | |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 50 W maximum | At rated output |
HD35283 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | N Female or SMA Female | Front panel standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +70 °C | |
| Relative Humidity | up to 95% | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 210 × 100 × 300 mm | Excluding brackets |
| Dimensions W x H x D (Benchtop) | 242 × 110 × 384 mm | Including brackets |
| RF Connectors In/Out | N Female or SMA Female | Front panel standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35283 documentation
Download HD35283 V0.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD35283
HD35283 is listed for 0.009–1,000 MHz operation.
Output: 2 W minimum Psat. Gain: 33 dB minimum. P1dB: >1 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 210 × 100 × 300 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.