HD35285 RF Amplifier
Module
Product photograph pending confirmation.
HD35285
| FREQUENCY RANGE50–6,000 MHz | OUTPUT POWER1 W (catalog) |
| GAIN25 dB minimum | SUPPLY VOLTAGE12 VDC Nom |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier System |
HD35285 electrical specifications
Source: HD35285 V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
Frequency clarification: This page follows the matching PDF (50–6,000 MHz). The product matrix lists 1,000–18,000 MHz. Confirm the required frequency range when requesting a quote.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 50 – 6000 MHz | |
| Power Output @ P1 dB | 25 dBm minimum | CW |
| Power Gain | 25 dB minimum | 0 dBm or less for rated Pout |
| Gain Flatness | 3.0 dB p-p maximum | |
| Input Return Loss | 10 dB minimum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 15 dBm/Tone, A = 1 MHz |
| Non Harmonics Spurious | -60 dBc maximum | |
| Operating Voltage | 12 VDC Nom | |
| Current Consumption | 1 A maximum | At rated Pout |
HD35285 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 2 | VDD | 12 VDC |
| 3 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 60 × 50 × 27 mm | |
| RF Connectors In/Out | SMA female | |
| DC Power / Interface Connector | Feed-Thru | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35285 documentation
Download HD35285 V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35285
HD35285 is listed for 50–6,000 MHz operation.
Output: 1 W (catalog). Gain: 25 dB minimum. P1dB: 25 dBm minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 12 VDC Nom. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 60 × 50 × 27 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.